Construction of new buildings
The link below allows you to view the work-progress (1 picture every 15 minutes).
| Machinery | 200 high-performance Esco and Codec SA bar-turning machines |
| Features | Thread-cutting machining, without ending |
| Dimensions | Ø 0.30 – 6.50 mm; maximum length: 500 mm |
| Production capacity | Over 4 million parts per day |
| Batches | medium-sized to large ( from 10,000 to several million parts) |
| Materials | Brass, bronze, copper, nickel silver Steel ( stainless, hardenable, etc…) Aluminium |
| Monitoring during manufacturing | Every machine operator checks the production in progress at regular intervals according to an in-house pattern and to a predefined control plan.Every monitoring instrument is regularly listed and calibrated. |
| “Zero Defect” Control | One of our departments is specifically dedicated to performing additional automated testings to ensure the predefined parameters are kept unchanged or detect odd parts. |
| Final Control | Our Quality Control Department performs a final set of checkings on samples. The collected data can either accompany the shipped parts or be retained in our premises. |
| Environmental and Health and Safety issues | No effort has been spared to keep the environmental impact of our different manufacturing stages as minimal as possible whilst delivering an impeccable quality output. Our in-house air and water treatment systems – whereas waste disposal has been outsourced to a specialised contractor- leaves us with a good Life Cycle Assessment record on environmental issues. Moreover, local statutory controls tend to affirm our compliance with the highest international standards. |
| ISO 9001-2015 | Codec SA has successfully applied for a certification with the ISO 9001-2015 quality system that covers all the company’s activities in relation to precision turned-parts manufacturing.Therefore, the machine manufacturing was not included in the process. |
| Monitoring during manufacturing | Every machine operator checks the production in progress at regular intervals according to an in-house pattern and to a predefined control plan.Every monitoring instrument is regularly listed and calibrated. |
| “Zero Defect” Control | One of our departments is specifically dedicated to performing additional automated testing to ensure the predefined parameters are met. |
| Final Control | Our Quality Control Department performs a final set of checks on samples. The collected data can either accompany the shipped parts or be retained in our premises. |
| Environmental and Health and Safety issues | No effort has been spared to keep the environmental impact of our different manufacturing stages as minimal as possible whilst delivering an impeccable quality output. Our in-house air and water treatment systems (has been outsourced to a specialised contractor) is leaving us with a good Life Cycle Assessment record on environmental issues. Moreover, local statutory controls tend to affirm our compliance with the highest international standards. |
| ISO 9001-2015 | Codec SA has successfully archived ISO certification that covers all the company’s activities in relation to precision turned-parts manufacturing.The departments for tool manufacturing (clamps, chisels and modified toolheads for Escomatic lathes) and machine manufacturing were not included in the process. |
Should you have any question, request or comment to submit, do not hesitate to write us: we will reply promptly.
